The terminal is used as a type of connector, and electrical conductivity is its primary function. The wire is connected to the circuit board, controller, etc. through the terminal block to ensure the normal operation of the device...

When judging, the electrical harness connector at both ends of the electrical equipment and the control switch can be disconnected, and the short circuit of the line can be detected by the electric meter or the test light...

The automotive wiring harness is functionally divided into a power line carrying electric power for driving an actuator (actuator) and a signal line for transmitting a sensor input command. A power line is a thick wire that carries a large current, and...

Automotive wires are also called low-voltage wires, which are different from ordinary household wires. Ordinary household wires are copper single-core wires with a certain hardness. The car wires are all copper multi-core soft wires, some soft wires are as thin as hair...

Wire harness manufacturing process is divided into the following parts: cutting peeling brushing twisting tin staining terminal crimping assembly electrical testing appearance inspection packaging. 1. Automatic wire cutting equipment is used to cut wires according to the size required by the process...